Introduction / Specification of EDM Oil:
Electric Discharge Machining Oil is a metal removal process involving the removal of material from the workpiece by a series of controlled electric discharges or sparks. The tool and the workpiece are insulated by a special dielectric fluid. Wire EDM Oil is also named as Wire cut EDM coolant.
EDM oil from 3X Polymer is water-based. When in use, it needs to be diluted with deionized water according to a certain ratio to a certain concentration of working fluid before use.
3X Product Range:
|
Mother liquid for coolant oil for WEDM |
A high-concentration original liquid, packed in ton barrels(IBC tank). It needs to be diluted with water first, and fully stirred to make the following types of products. |
| X-998 | It is suitable for medium-feeding wire cutting machines with multipass machinings, such as 1 cut and 3 trim, etc. Higher precision products can be obtained. |
| X-808 | It is suitable for medium-feeding wire cutting machines with multipass machinings, such as 1 cut and 1 trim, etc. |
| X-618 | It is suitable for high-feeding wire cutting machines with single pass machinings, such as 1 cut no trim. |
| X-365 | It is suitable for high-feeding wire cutting machines with single pass machinings, such as 1 cut no trim. |
| X-365plus |
It is suitable for high-feeding wire cutting machines with single-pass machining, such as 1 cut no trim. |
Welcome to contact our sales manager for more information about 3X POLYMER EDM oil!
