Synthetic Ester: X Easy has been widely used as the main lubricant additive in synthetic and semi-synthetic formulations of water-soluble metalworking fluids. The formulas displayed in the tables below are for reference only. Please contact us for additional technical support.
Name of Raw Material | Formula 1 - Solid Content 30% | Formula 2 - Solid Content 40% |
3X Polymer® X EASY | 33% | 40% |
Antirust Agent （Polyacid, borate, etc.） | 5% -10% | 5% -10% |
Amino Alcohol （TEA etc.） | 0 | 1%-5% |
Alkali Aetention Agent （AMP-95, Modified Amines etc.） | 1% - 3% | 1% - 3% |
Bactericide （MBM/BK/BIT/MIT etc.） | 1% - 3% | 1% - 3% |
Defoamer （polysiloxane etc.） | 0.1% or without | 0.1% or without |
Deionized Water | up to 100% | up to 100% |
Cost Comparison | The cost is 30- 40% lower than that of polyether formulations. | The cost is 30- 40% lower than that of polyether formulations. |
Mother Liquor Appearance | Yellowish transparent | Yellowish transparent |
5% Mass Ratio Diluted Appearance | Clear transparent | Clear transparent |
PH Value | 9.0士0.5 adjustable | 9.0士0.5 adjustable |
Lubrication Effect | Lubrication is 50% higher than that of polyether formulations. | Lubrication is 50% higher than that of polyether formulations. |
Processing Material Description | With 3X Polymer®X EASY, aluminum immersion for 24 hours without discoloration. The PH value of the formula for processing aluminum should be controlled, and the PH can be adjusted appropriately for cast iron and steel. | |
Name of Raw Material | Formula 1 - Solid Content 30% |
3X Polymer® X EASY | 40% |
Sulfonated Caster Oil | 0% |
Base Oil and Fatty Aicds | 0% |
Antirust Agent (Polyacid, Borate, etc.) | 5% - 10% |
Amino Alcohol (TEA etc.) | 1% - 5% |
Alkali Retention Agent (AMP-95,Modified Amines etc.) | 1% - 3% |
Bactericide (MBM/BK/BIT/MIT etc.) | 1% - 3% |
Defoamer (Polysiloxane etc.) | 0.1% or without |
Deionized water | 0.1% or without |
Cost Comparison | The cost is 20 ~ 30% lower than that of turkey red oil formulations. |
Mother Liquor Appearance | Yellowish transparent |
5% Mass Ratio Diluted Appearance | Clear transparent |
PH Value | 9.5士0.5 adjustable |
Lubrication Effect | Lubrication is improved by 50% compared to sulfonated castor oil formulations. |
Processing Material Description | With 3X Polymer®X EASY, aluminum immersion for 24 hours without discoloration. The PH value of the formula for processing aluminum should be controlled, and the PH can be adjusted appropriately for cast iron and steel. |
3X Polymer® bio-based products are reproducible and biodegradable, high flash point, super high viscosity index and excellent lubricity, which give it absolute environmental and performance advantages over traditional mineral oil products.
