Wire EDM Coolant Oils X-365T

X-998 wire EDM working fluids (Concentrate) for Muti-pass EDM Machine

Medium speed wire cut EDM coolant X-998 is a mixture of water soluble substances. After diluting with water, it becomes the operation liquid of high speed and medium speed WEDM, which is an eco-friendly wire cutting coolant fluid. The component of dielectric fluid does not contain nitrite and iminobisetnanol. The conclusion of Acute Oral Toxicity Test is ” belongs to the actual non-toxic grade “.

WEDM wire cutting fluids (X-998) suits for wire cutting of various conductive metal materials, such as die steel, high-carbon steel, carbide alloy, nickel alloy, titanium alloy, copper, aluminum, magnesium and its alloy, magnet steel, crystal, semiconductor material, etc. The effect is particularly prominent when it is used for cutting tungsten, molybdenum and other special materials.

This kind of new type metalworking fluids use unique environmental protection synthetic formula without mineral oil, fully in line with the national surface water discharge standards. Nitrite – free, phosphorus – free, non – toxic, non – corrosive, non – damaging products. It plays an important role in EDM and WEDM wire-cut consumables.

Medium Speed Wirecut coolant oil X-365T is applied to the CNC wire cut EDM machine, reusable wire cut machine, and molybdenum wire cut machine with excellent rust prevention, lubrication, cooling, and cleaning properties. Easy to use, store, and transport and is the first choice of metalworking manufacturers.

Advantages：

Efficient —- High cutting efficiency with large thickness without fringe, 20% faster than emulsified oil.
Excellent Surface —- High surface finish, 30% better than emulsified oil processing.
Clean —- There is no black sticky attachment on the cutting surface and you do not need solvent oil to clean. Easy to release the workpiece.
Low foam —- Easy visual operation.
Long life —- Low silk consumption, saving processing costs.
Safe —- Free of restricted chemicals, non-toxic.
Anti-rust —- Good rust protection properties for black and non-ferrous material.

Attention:

Before first use, please follow the instruction.

Please add the original liquid and water in proportion when filling the liquid. While mixing, dilute in a ratio of 1 part fluid to 5.5 parts water. Ordinary tap water can be used to mix with the working fluid. Don’t use well water, hard water, unclean water, or other mixture. Purified water is recommended.

Mixture Ratio:

X-365T : Water = 1:10~15 kg

Please use the magnet to hold the workpiece before processing to avoid falling and breaking the molybdenum wire.
The original cutting fluid and solution should be poured cleanly and thoroughly clean the water tank. First, rinse with water, and then prepare a certain concentration ratio of cutting fluid solution.
Please add new fluid to the tank. Make sure to use the mixed fluid when the water levels fall, just keep the concentration stays at 11%-12%. Ensure that the replacement is the same type of cutting fluid, and can not be replaced at will.
When working for a long time, please replace the new fluid in time. This can guarantee machining precision.
If installing a filterable water-cycling system or filter in the work table and water tank inlet, the working fluid will be much cleaner and the useful life will be longer.

Wire EDM Coolant Oils X-365T

Advantages：

Attention:

PRODUCTS

Get A Free Quote Now !