Cutting Fluid for Wire Cut EDM X-365

X-365 Water-Soluble Cutting Fluid for Wire Cutting Machine

High-speed wire cutting liquid X-365 is a mixture of water soluble substances. After diluting with water, it becomes the operation liquid of high speed and medium speed WEDM, which is an eco-friendly wire cutting coolant fluid. The component of dielectric fluid does not contain nitrite and iminobisetnanol. The conclusion of Acute Oral Toxicity Test is ” belongs to the actual non-toxic grade “.

X-365 WEDM wire cutting fluid suits for wire cutting of various conductive metal materials, such as die steel, high-carbon steel, carbide alloy, nickel alloy, titanium alloy, copper, aluminum, magnesium and its alloy, magnet steel, crystal, semiconductor material, etc. The effect is particularly prominent when it is used for cutting tungsten, molybdenum and other special materials.

This kind of new type metalworking fluids use unique environmental protection synthetic formula without mineral oil, fully in line with the national surface water discharge standards. Nitrite-free, phosphorus–free, non–toxic, non–corrosive, non–damaging products. It plays an important role in EDM consumable and WEDM wire-cut consumable.

WEDM coolant oil for wirecut EDM machines

wire cutting fluid X-365 plus super concentrated

Fast Speed Wire cutting Fluid X-365 is applied to CNC EDM wire cut machines, reusable wirecut EDM machines, and molybdenum wire cut machines with excellent rust prevention, lubricating, cooling, and cleaning properties. Easy to use, store, and transport. It is the first choice of metalworking manufacturers.

Advantages：

Efficient —————-High cutting efficiency with large thickness without fringe, 20% faster than emulsified oil.
Excellent Surface —High surface finish, 30% better than emulsified oil processing.
Clean ——————–There is no black sticky attachment on the cutting surface and do not need solvent oil to clean. Easy to release the workpiece.
Low foam ————–Easy visual operation.
Long life —————-Low silk consumption, save processing cost for you.
Safe———————–Free of restricted chemicals, non-toxic.
Anti-rust —————Good rust protection properties for black and non-ferrous material.

Attention:

Before first use, please follow the instruction.

Please add the original liquid and water in proportion when filling the liquid. While mixing, dilute in a ratio of 1 part fluid to 10 parts water. Ordinary tap water can be used to mix with the working fluid. Don’t use well water, hard water, unclean water, or other mixture. Purified water is recommended.

Mixing Ratio:

X-365 : Water = 1:10~20 kg

Please use a magnet to hold the workpiece before processing to avoid falling and breaking the molybdenum wire.
The original cutting fluid and solution should be poured clean and thoroughly cleaned in the water tank, first rinse with water, and then prepare a certain concentration ratio of cutting fluid solution.
Please add new fluid to the tank. Make sure to use the mixed fluid when the water levels fall, just keep the concentration stays at 11%-12%. Ensure that the replacement is the same type of cutting fluid, and can not be replaced at will.
When working for a long time, please replace the new metalworking fluid in time. This can guarantee machining precision.
If installing a filterable water-cycling system or filter in the work table and water tank inlet, the working fluids will be much cleaner and the usage life will be longer.

Cutting Fluid for Wire Cut EDM X-365

X-365 Water-Soluble Cutting Fluid for Wire Cutting Machine

Advantages：

Attention:

PRODUCTS

Get A Free Quote Now !