MS-WEDM ( Medium Speed wire EDM ) Dielectric Fluid X-618 is suitable for CNC wire-cut EDM machine, reusable wire cut machine, molybdenum wire cut machine with excellent rust prevention, lubrication, cooling, and cleaning properties. Easy to use, storage and transportation, is the first choice of Wire EDM shops.

Advantages：

• Efficient                          High cutting efficiency with large thickness without fringe, 20% faster than emulsified oil.
• Excellent Surface       High surface finish, 30% better than emulsified oil processing.
• Clean                                There is no black sticky attachment on the cutting surface and do not need solvent oil to clean. Easy to release the work-piece.
• Low foam                       Easy visual operation.
• Long life                         Low silk consumption, save processing cost for you.
• Safe                                   Free of restricted chemicals, non-toxic.
• Anti-rust                        Good rust protection  properties for black and non-ferrous material.

Attention:

Before first use, please follow the instruction.

• Please add the original liquid and water in proportion when filling the liquid. While mixing, dilute in a ratio of 1 part fluid to 5.5 parts water. Ordinary tap water can be used to mix with the working fluid. Don’t use the well water, hard water, unclean water or other mixture. The purified water is recommended.

• Please use magnet to hold the work-piece before processing to avoid falling and breaking molybdenum wire.
• The original cutting fluid and solution should be poured clean and thoroughly clean the water tank, first rinse with water, and then prepare a certain concentration ration of cutting fluid solution.
• Please add new fluid to the tank. Make sure using the mixed fluid when the water levels fall, just keep the concentration stays at 11%-12%. Ensure that the replacement is the same type of cutting fluid, can not be replaced at will.
• When working a long time, please replace new fluid in time. This can guarantee machining precision.
  If installing filterable water-cycling system or filter in work table and water tank inlet, the working fluid will be much cleaner and the use life will be longer.