Chemical Admixtures For Lightweight Concrete

X2 Concrete Admixtures adopt a new generation of green formula, can significantly improve concrete and block quality and reduce construction costs. The first choice for concrete manufacturing factories.

X2 Multifunctional Concrete Admixtures

X2 multifunctional concrete admixture is a type of chemical admiture for concrete AAC/ALC, which can be used as water-reducer, modifying agent etc.

X2 concrete admixtures can significantly adjust the diffusion of slurry and improve concrete performance, increase strength and reduce cost. It is especially suitable for strong alkaline environment and sand with high mud content and various slag with high water content.

AAC/ALC Concrete Additives – a type of Multifunctional Chemical Admixtures for Antoclaved Lightweight Concrete

How ALC concrete admixtures work in lightweight concrete ?

Increase the dispersion of concrete

20%-30% cement in concrete cannot function normally. This part of the cement, which can only play the role of filler, is a great waste of cost in concrete applications. The use of concrete reinforcing agent can fully disperse the cement particles, prevent them from agglomeration, and then accelerate the hydration process of cement, so that the amount of cement used in unit concrete can be greatly reduced.

Increase the adsorption capacity of water reducing agent

The concrete reinforcing agent can enhance the effective adsorption capacity of the water reducing agent to the cement particles, thereby further expanding the dispersibility of the cement particles and improving the use effect of the water reducing agent.

What value can we bring to you?

Reduce the consumption of high-priced raw materials such as cement and lime by 10-20%
Under the same ratio, using X2 can increase the output by 10%
With X2, the choice of raw materials can be broadened and low-priced industrial waste can be usedWith X2。
the strength can be increased by 10-15%.
Using X2, the water previously filled by slag and stone powder is released, and the moisture content of the slurry is reduced.
With remarkable anti-sinking function, it is especially suitable for the production application of AAC/ALC sheet.

In short, its efficacy depends on your needs.

Physical Satus	Technical Data
Appearance	Orange-Red Liquid
Chemical Component	Low Molecular Weight Polypropylene Polymer
Density	1.06 – 1.09
PH Value ( 23℃， 30% dilution )	7 ~ 9
Molecular Weight	1800 ~ 2000
Recommended Dosage	0.03% - 0.3 % of slurry weight

Main Features:

Improve the strength of concrete

After using X2 AAC/ALC slurry additives, the strength of cement products can be increased by 30%, and the amount of cement can be reduced by 10%-20% while maintaining the same strength.

Improve concrete performance

X2 concrete additives can effectively improve the workability of cement slurry, anti-bleeding, non-segregation, easy to pump, and greatly improve the frost resistance and carbonation resistance.

Expand the application

X2 super activators on the concrete with high flyash is not only suitable for various types of cement and has strong compatibility with various types of admixtures, but also can improve the performance of water reducing agent on raw materials (such as: low-quality fly ash, sand with high mud content, stone powder) The adaptability of the large content of stones) reduces the sensitivity to changes in the dosage of superplasticizers. It can effectively control the negative phenomena (segregation, poor encapsulation) when the superplasticizer is added at a high dosage.

Eco-friendly

This concrete additive is non-toxic, harmless, non-polluting and non-radioactive, and the chloride ions and alkalis do not exceed the standard.

Why use X2 slurry activator in your product?

Raw materials such as sand, slag, stone powder have high mud content and high water content, which affects various applications.
Excessive water-material ratio leads to a series of problems, such as long resting time and large amount of main materials.
The source of sand is in short supply and the price is high.
The ALC market is facing fierce competition, the cost remains high, and there is a requirement for production increase.
ALC has high requirements for pouring stability and requires low cost to make high-quality panels.