Wire Cutting Fluid (Super Concentrated) X-365 plus

3X Polymer® bio-based series wedm super concentrated ointment for WEDM X-365 plus is specially designed for Single-pass Fast-speed wire cut electrical discharge machines ( HS-WEDM), also called reusable molybdenum wire cut machine or reciprocating wire-cut EDM Machine Tool CNC. It comes with excellent rust prevention, lubrication, cooling, and cleaning properties. Easy to use, storage and transportation, is the first choice of metalworking wholesales and EDM consumable distributors.

Advantages：

High efficiency High cutting efficiency with large thickness without stripe.
High precision Superior chip evacuation for higher precision
Low wire consumption Fine surface finish, 30% better than emulsified oil processing.
Excellent Stability There is no black sticky attachment on the cutting surface and do not need solvent oil to clean. Easy to release the work-piece.
Natural detergency Easy visual operation.
Long life 50% longer than JR3A
Bio-based Free of restricted chemicals, non-toxic.
Anti-rust Good rust protection properties for ferrous and non-ferrous metal for more than 30 days.

wire cutting fluid X-365 plus super concentrated

Instructions for use

Before first use, please follow the instruction.

Please add the original liquid and water in proportion when filling the liquid. While mixing, dilute in a ratio of 1 part fluid to 40 parts water. Ordinary tap water can be used to mix with the working fluid. Don’t use well water, hard water, unclean water, or other mixture. Purified water is recommended.

Mixing Ratio:

X-365 plus : water = 1 : 40 ~ 50

Please use a magnet to hold the workpiece before processing to avoid falling and breaking the molybdenum wire.
The original cutting fluid and solution should be poured clean and thoroughly clean into the water tank, first rinse with water, and then prepare a certain concentration ratio of cutting fluid solution.
Please add new fluid to the tank. Make sure to use the mixed fluid when the water levels fall, just keep the concentration stays at 11%-12%. Ensure that the replacement is the same type of cutting fluid, and can not be replaced at will.
When working for a long time, please replace the new fluid in time. This can guarantee machining precision.
If installing a filterable water-cycling system or filter in the work table and water tank inlet, the working fluid will be much cleaner and the useful life will be longer.

Wire Cutting Fluid (Super Concentrated) X-365 plus

Advantages：

Instructions for use

PRODUCTS

Get A Free Quote Now !